公司新聞
壓路機注意三點能讓您使用得心應手
來源：http://www.piao.sd.cn/ 日期：2022-10-24
壓路機相比大型壓路機來講，因為體積比較小，所以操作起來十分的便捷，而且大型壓路機所擁有的功能，其實它也是具備的，所以憑借著其優勢受到了眾多朋友們的青睞。為了能夠順利使用壓路機，那么還是需要了解清楚壓路機的操作事項，這樣使用起來才算得心應手。濟南壓路機租賃廠家為您講解。
Compared with the large roller, the roller is very convenient to operate because of its small size. In addition, the large roller also has functions, so it is favored by many friends by virtue of its advantages. In order to use the roller smoothly, you still need to know the operation of the roller, so that you can use it easily. Jinan Road Roller Rental Factory will explain to you.
初次使用壓路機，由于它的各個零件都是新的，因此摩擦面都還比較的粗糙表面的承壓能力也不是很穩定，因此在剛開始使用壓路機進行作業的時候，壓路機在開機之前要做的就是先檢查壓路機的制動是否靈敏，制動結果如何，檢查零件是否有松動的地方。保障壓路機的正常運行，不至于施工時出現故障。要注意控制作業的時間和強度，否則一旦出現超負荷作業的情況，很容易使得各個新部件損壞。
When the roller is used for the first time, because all its parts are new, the pressure bearing capacity of the rough surface of the friction surface is not very stable. Therefore, when the roller is just used for operation, what the roller should do before starting up is to check whether the brake of the roller is sensitive, what the brake result is, and whether the parts are loose. The normal operation of the roller shall be ensured to avoid failure during construction. Pay attention to control the time and intensity of the operation, otherwise, in case of overload operation, each new part will be easily damaged.
剛使用的壓路機由于都是剛剛裝配的，因此各部件之間的潤滑都比較欠缺，這對壓路機的使用也會造成很大的影響，嚴重時甚至?xí)?dǎo)致有些零件表面出現擦傷，因此在使用之前要在滾動磨合比較多的地方涂上適量的潤滑油。
The newly used roller is just assembled, so the lubrication between the components is relatively insufficient, which will also have a great impact on the use of the roller, and even cause scratches on the surface of some parts in serious cases. Therefore, an appropriate amount of lubricating oil should be applied to the places with more rolling running in before use.
各部件容易出現松動。由于部件都是剛剛裝配的之前也沒有正常的投入使用過。一旦投入使用過程中受到?jīng)_擊或者受熱等影響，很容易使得壓路機原本還比較緊固的部件出現松動的現象。
Parts are easy to loosen. Because the components are just assembled and have not been put into normal use before. Once it is impacted or heated in the process of putting into use, it is easy to make the parts of the roller that are still relatively fastened loose.
操控壓路機的駕駛員對機器不夠熟悉，由于是新買的機器，駕駛員之前和它也沒有打過交道，因此對于它的結構和性能都比較的陌生，因此我們要求駕駛員駕駛壓路機之前，先對壓路機整個結構做一個觀察了解。
The driver who controls the roller is not familiar with the machine. Since it is a newly bought machine and the driver has not dealt with it before, he is unfamiliar with its structure and performance. Therefore, we require the driver to observe and understand the whole structure of the roller before driving it.
以上從四個方面說一下壓路機操作注意事項，對于壓路機要學會輕松應對，讓我們的施工變得更加輕松，不要因為您的一次錯誤操作，對壓路機造成不良影響。更多相關事項的了解就來我們網站http://www.piao.sd.cn進行咨詢了解吧！
The precautions for roller operation are described in four aspects above. It is necessary to learn how to deal with the roller easily to make our construction easier. Don't make a bad impact on the roller because of your wrong operation. For more information on related matters, please come to our website http://www.piao.sd.cn Consult and understand!
公司地址：濟南市商河縣賈莊鎮民營經濟創業園
公司名稱:永誠廣建公路材料（山東）有限公司 
備案號：